工程制图(黄河水利职业技术学院) 中国大学mooc答案满分完整版章节测试

片丸规翠匹稠软皖慧甘缄镜泻

本门课程答案免费：

第一单元 制图基本知识 Basic Knowledge of Graphic Drawing 制图基本知识测试 basic knowledge test

1、 丁字尺是绘制水平线的长尺子。T square is used to make horizontal line.

答案: 正确

2、 A3图幅的大小是420X297.The size of A3 is 420X297.

答案: 正确

3、 A3图幅是A4图幅的2倍。The size of A3 is two times of A4 drawing sheet.

答案: 正确

4、 尺规绘图，需要图板、丁字尺和三角板等绘图工具配合使用。One has to learn the usage of drawing board, T square , set square and other drawing tools together when makes drawings.

答案: 正确

5、 标题栏一般绘制在图纸的右下角。The title block usually lies in the right corner of drawing sheet.

答案: 正确

6、 绘制图形，需要遵循绘图标准，正确使用绘图工具。One should follow drawing standards and use the drawing tools properly when making drawings.

答案: 正确

第一单元 制图基本知识 Basic Knowledge of Graphic Drawing 制图工具和标准测试test for drawing tools and standards

1、 A1图幅的尺寸是多少 What is the size of A1 drawing sheet

答案: 594×841

2、 A2图幅的尺寸是多少What is the size of A2 drawing sheet

答案: 420×594

3、 GB中规定A0图幅的尺寸是多少 What is the size of A0 drawing sheet

答案: 841×1189

4、 A0图幅是A3图幅的几倍how many A3 drawing sheet are in A0 drawing sheet

答案: 8

5、 绘制某形体的三视图，已知长5360mm,宽3750mm,高1200mm，用1：200的比例绘制，那么选用多大的图幅比较合适Which drawing sheet will you choose to show three views of a solid considering the arrangement of drawing? Length=5360,width=3750,height=1200

答案: A4

6、 绘制某形体的三视图，已知长72000mm,宽32000mm,高63000mm，用1：200的比例绘制，那么选用多大的图幅Which drawing sheet will you choose to show three views of a solid?Length=72000,width=32000,height=63000 

答案: A1

7、  A1图幅是A4图幅的几倍How many A3 drawing sheet are in A1 drawing sheet?

答案: 8倍 8times

8、 非装订式A1图幅的图框线距图幅边的尺寸是多少How long is the frame line to the boundary Suppose A1 drawing sheet is non-binding.

答案: 20

9、 非装订式A2图幅的图框线距图幅边的尺寸是多少How long is the frame line to the boundary Suppose A2 drawing sheet is non-binding.

答案: 10

10、 A2图幅中的e值是多少毫米How long is the E in A2 drawing sheet

答案: 10

11、 国家标准中规定了几种不同尺寸的基本幅面How many drawing sheets are used in engineering drawing

答案: 5

12、 下列哪个幅面不是GB中规定的基本幅面 Which drawing sheet is not introduced in engineering drawing?

答案: A5

13、 分别用下列比例画同一个物体，画出图形最大的比例是多少 To draw the same solid with different scales, which scale shows the biggest figure?

答案: 1:10

14、 分别用下列比例画同一个物体，画出图形最小的比例是多少 To draw the same solid with different scales, which scale you choose can get the smallest figure?

答案: 1:200

15、 用1:250的比例画图，物体上2米长的线段应画多少  How long will you draw in a sheet of two meters long with scale of 1:250

答案: 8mm

16、 用1:250的比例画图，物体上1米长的线段应画多少 How long will you draw in a sheet of one meter long with the scale of 1:250

答案: 4mm

17、 用1:250的比例画图，在图中1mm长的线段实际长为多少It is  1 mm in drawing sheet ,with the scale of 1:250. What is the actural length in space?

答案: 250mm

18、 用1:250的比例画图，长8米的构建，图上画多少How long will you draw in a sheet of 8 meters with the scale of 1:250

答案: 32mm

19、 分别用下列比例画同一个物体，画出图形最大的比例是多少To draw the same solid with different scales, which scale will you choose to get the biggest figure?

答案: 1:50

20、 分别用下列比例画同一个物体，画出图形与物体一样大的比例是多少To draw a solid with different scales, which scale will you choose to get the same size drawing as the solid?

答案: 1:1

第一单元 制图基本知识 Basic Knowledge of Graphic Drawing 中学投影知识测试 projection basic knowledge test of high sch

1、 根据已知的三面投影选择对应的立体图形。According to the given three side views, choose the correct object.

答案:

2、 根据已知立体图形选择对应的三面投影。According to the given pictorial drawing, choose the correct three side views.

答案:

3、 根据已知立体图形选择对应的三面投影。According to the given pictorial drawing, choose the correct three side views.

答案:

4、 根据已知立体图形选择对应的三面投影。According to the given pictorial drawing, choose the correct three side views.

答案:

5、 根据已知立体图形选择对应的三面投影。According to the given pictorial drawing, choose the correct three side views.

答案:

6、 根据已知立体图形选择对应的三面投影。According to the given pictorial drawing, choose the correct three side views.

答案:

7、 根据已知立体图形选择对应的三面投影。According to the given pictorial drawing, choose the correct three side views.

答案:

8、 根据已知立体图形选择对应的三面投影。According to the given pictorial drawing, choose the correct three side views.

答案:

9、 第2个形体与给定的三面视图对应.The second object fits with the given three side views.

答案: 正确

10、 第1个形体与给定的三面视图对应.The first object fits with the given three side views.

答案: 错误

第二单元 三视图 Three views 投影的基本知识 Test for projection knowledge

1、 三视图采用的投影方法是什么   What is the projection method of three views

答案: 正投影法 orthographic projection method

2、 正投影法中，投影面、观察者、物体三者相对位置如何What is the correct relative position of the orthographic projection method ?  projection plane, observer and object

答案: 人——物——面  observer—object—projection plane

3、 左视图反映了物体什么位置Which directions does left view show?

答案: 上下、前后方位  the position of up and down, front and rear

4、 能反映出物体前后方位的视图是哪个Which two views can express the directions of front and back

答案: 俯视图和左视图  top and left views                        

5、 三视图中“宽相等”是指哪两个视图之间的关系Which two views follow the rule of width equality

答案: 俯视图和左视图  top and left views      

6、 能反映出物体左右方位的视图是哪个Which two views can show the directions of left and right

答案: 主视图和俯视图 front and top views    

7、  能反映出物体上下方位的视图是哪个Which two views can show the directions of the top and bottom

答案: 主视图和左视图 front and left views

8、 直立摆放的圆柱，左右轮廓素线在左视图中的投影在哪里Where is the projection of generating lines in the left view when the axis of a cylinder is right to the projection plane of H-projection plane

答案: 在轴线上in the axis of the left view

9、  两个视图为矩形线框，一面试图是组合线框的形体是什么图形What is the shape of the object  two views that  are both rectangles and one view is a composite frame

答案: 组合柱composite prism

10、 两个视图为三角形，一面视图是圆的基本体是什么图形What is the shape of the object  two views that are both triangles and one view is a circle frame?

答案: 圆锥cone

第二单元 三视图 Three views 三视图视图表达测试 test for three views

1、 根据形体直观图，绘制的俯视图是正确的。According to the given pictorial drawing ,the top view is correct.

答案: 错误

2、 根据形体直观图，绘制的左视图是正确的。According to the given pictorial drawing ,the left view is correct.

答案: 正确

3、 根据形体直观图，绘制的俯视图是正确的。According to the given pictorial drawing ,the top view is correct.

答案: 正确

4、 根据形体直观图，绘制的主视图是正确的。According to the given pictorial drawing ,the front view is correct.

答案: 正确

5、 根据形体直观图，绘制的左视图是正确的。According to the given pictorial drawing ,the left view is correct.

答案: 正确

6、 根据形体直观图，绘制的主视图是正确的。According to the given pictorial drawing ,the front view is correct.

答案: 错误

7、 根据形体直观图，绘制的左视图是正确的。According to the given pictorial drawing ,the left view is correct.

答案: 正确

8、 根据形体直观图，绘制的俯视图是正确的。According to the given pictorial drawing ,the top view is correct.

答案: 正确

9、 根据形体直观图，绘制的俯视图是正确的。According to the given pictorial drawing ,the top view is correct.

答案: 正确

10、 根据形体直观图，绘制的左视图是正确的。According to the given pictorial drawing ,the left view is correct.

答案: 正确

第三单元 柱体三视图 Three views of prism and cylindrical solids 柱体三视图单元测试 test for three views of prisms

1、 根据形体直观图，绘制的主视图是正确的。According to the given pictorial drawing ,the front view is correct.

答案: 错误

2、 根据形体直观图，绘制的俯视图是正确的。According to the given pictorial drawing ,the top view is correct.

答案: 正确

3、 根据形体直观图，绘制的俯视图是正确的。According to the given pictorial drawing ,the top view is correct.

答案: 错误

4、 根据形体直观图，绘制的俯视图是正确的。According to the given pictorial drawing ,the top view is correct.

答案: 正确

5、 根据形体直观图，绘制的左视图是正确的。According to the given pictorial drawing ,the left view is correct.

答案: 正确

6、 根据形体直观图，绘制的主视图是正确的。According to the given pictorial drawing ,the front view is correct.

答案: 正确

7、 半圆柱的三视图是正确的。The given three views of semi-cylinder are correct.

答案: 错误

8、 根据形体直观图，绘制的俯视图是正确的。According to the given pictorial drawing ,the top view is correct.

答案: 错误

9、 根据形体直观图，绘制的俯视图是正确的。According to the given pictorial drawing ,the top view is correct.

答案: 正确

10、 根据形体直观图，绘制的左视图是正确的。According to the given pictorial drawing ,the left view is correct.

答案: 正确

第四单元 锥台三视图 Three views of pyramid and frustum of pyramid 锥台三视图单元测试 test for three views of pyramid a

1、 根据形体直观图，绘制的三视图是正确的。According to the given pictorial drawing ,the three views are correct.

答案: 正确

2、 根据形体直观图，绘制的三视图是正确的。According to the given pictorial drawing ,the three views are correct.

答案: 错误

3、 根据形体直观图，绘制的三视图是正确的。According to the given pictorial drawing ,the three views are correct.

答案: 错误

4、 圆台的三视图是正确的。The three views of a frustum of a cone are correct

答案: 错误

5、 棱台的三视图是正确的。The three views of frustum of a rectgular pyramid are correct.

答案: 正确

6、 三棱锥的三视图是正确的。The three views of frustum of a  pyramid are correct.

答案: 正确

第五单元 简单叠加体 Superposition Solids 简单叠加体单元测试 test for simple solids

1、 根据直观图，绘制的三视图是正确的。The three views are correct based on the given drawings.

答案: 错误

2、 根据直观图，绘制的三视图是正确的。The three views are correct based on the given drawings.

答案: 正确

3、 根据直观图，绘制的三视图是正确的。The three views are correct based on the given drawings.

答案: 错误

4、 根据直观图，绘制的三视图是正确的。The three views are correct based on the given drawings.

答案: 正确

5、 根据直观图，绘制的三视图是正确的。The three views are correct based on the given drawings.

答案: 错误

6、 根据直观图，绘制的左视图是正确的。The three views are correct based on the given drawings.

答案: 错误

7、 根据直观图，绘制的左视图是正确的。The three views are correct based on the given drawings.

答案: 正确

8、 根据直观图，绘制的三视图是正确的。The three views are correct based on the given drawings.

答案: 错误

9、 根据直观图，绘制的左视图是正确的。The left view is  correct based on the given drawings.

答案: 正确

10、 根据直观图，绘制的左视图是正确的。The left view is  correct based on the given drawings.

答案: 错误

第六单元 简单切割体 Cutting solids 简单切割体单元测试 test for simple cutting solids

1、 根据直观图，绘制的三视图是正确的。According to the given pictorial drawing ,the three views are correct.

答案: 错误

2、 根据直观图，绘制的三视图是正确的。According to the given pictorial drawing ,the three views are correct.

答案: 错误

3、 根据直观图，绘制的三视图是正确的。According to the given pictorial drawing ,the three views are correct.

答案: 正确

4、 根据直观图，绘制的三视图是正确的。According to the given pictorial drawing ,the three views are correct.

答案: 错误

5、 根据直观图，绘制的三视图是正确的。According to the given pictorial drawing ,the three views are correct.

答案: 正确

6、 根据直观图，绘制的三视图是正确的。According to the given pictorial drawing ,the three views are correct.

答案: 错误

7、 根据直观图，绘制的三视图是正确的。According to the given pictorial drawing ,the three views are correct.

答案: 正确

8、 根据直观图，绘制的三视图是正确的。According to the given pictorial drawing ,the three views are correct.

答案: 错误

第六单元 简单切割体 Cutting solids 切割体读图测试 Test for cutting solids

1、 根据图示已知视图，选择正确的俯视图。(        )According to the figure., provide the correct top view.(        )

答案: D

2、 根据图示已知视图，选择正确的俯视图。(        )According to the figure., provide the correct top side view.(        )

答案: B

3、 根据图示所示已知视图，选择正确的俯视图。(        )According to the figure, provide the correct top view. (        )

答案: C

4、 根据图示已知视图，选择正确的俯视图。(        )According tothe figure, provide the correct top view. (        )

答案: B

5、 根据图示已知视图，选择正确的俯视图。(        )According to the figure, provide the correct top view.

答案: D

6、 根据图所示已知视图，选择正确的俯视图。(        )According to fig. provide the correct top view. (        )

答案: D

7、 根据图所示已知视图，选择正确的俯测图。(        )According to the figure, provide the correct top view. (        )

答案: D

8、 根据图示已知视图，选择正确的俯视图。(        )According to the figure, provide the correct top view. (        )

答案: A

9、 根据图示已知视图，选择正确的轴测图。(        )According to the figure, provide the correct axonometric drawing. (        )

答案: D

10、 根据图示已知视图，选择正确的轴测图。(        )According to the figure, provide the correct axonometric drawing (        )

答案: B

第七单元 平面体的轴测图 Axonometric drawing of planar solids 轴测图读图测试 Test for axonometric drawing

1、 根据图示视图，选择不可能的轴测图。(        )According to the given views, choose the impossible axonometric drawings.(        )

答案: D

2、 根据图示形体的俯视图，选择可能的轴测图。(        )According to the top view ,choose the possible axonometric drawing.(        )

答案: A;
C

3、 根据图示形体的俯视图，选择可能的轴测图。(        )According to the top view., choose the possible axonometric drawings.(        )

答案: A;
C

4、 根据所示形体的主视图，选择可能的轴测图。(        )According to front view ,choose the possible axonometric drawings.(        )

答案: A;
C;
D

5、 根据图示形体的主视图，选择可能的轴测图。(        )According to the front view ,choose the possible axonometric drawings.(        )

答案: A;
B;
C

6、 根据图示形体的主视图，选择可能的轴测图。(        )According to the front view , choose the possible axonometric drawings.(        )

答案: B;
C;
D

7、 根据图示形体的左视图，选择可能的轴测图。(        )According to the left view ,choose the possible axonometric drawings.(        )

答案: A;
B

8、 根据图所示形体的主视图，选择可能的轴测图。(        )According to the front view, choose the possible axonometric drawings.(        )

答案: A;
D

9、 根据图所示形体的俯视图，选择可能的轴测图。(        )According to the top view , choose the possible axonometric drawings.(        )

答案: B;
C;
D

10、 根据图示形体的俯视图，选择可能的轴测图。(        )According to the top view , choose the possible axonometric drawings.(        )

答案: B;
C;
D

第七单元 平面体的轴测图 Axonometric drawing of planar solids 轴测图基本知识测试 Test for basic knowledge

1、 获得斜轴测图的投影方法是什么Which projection can get oblique axonometric drawing

答案: 斜投影法oblique projection method

2、 获得正轴测图的投影方法是什么Which projection can get isometric drawing

答案: 正投影法 orthogonal projection method

3、 轴测图具有的基本性质是什么What are the characteristics of axonometric drawings

答案: 平行性 parallel and measurement

4、  斜二测的轴间角是多少度Which choice is the angles of cabinet drawing

答案: 90°,135°,135°

5、 正等测的轴间角是多少度    Which choice is the angles of isometric drawing

答案: 都是120° all 120°

6、 斜二测的轴向伸缩系数是多少Which choice is the axis factors of cabinet drawing

答案: p=r=1,q=0.5

7、 正等测的轴向伸缩系数近似值是多少Which choice is the factors of isometric drawing

答案: p=q=r=1

8、 正平面上圆的斜二测是什么形状What  is the front projection of a circle

答案: 与视图相同的圆the same circle as the real size

9、 画正等测，圆柱底面为侧平圆的中心线应平行哪两个轴测轴Which isometric axes should be parallel when the faces of cylinder are parallel to the vertical projection plane

答案: Y、Z轴  axes of Z and Y

10、 下列图形中那些画斜二测时作图简单Which figure makes cabinet drawing simple

答案: 正平圆 vertical parallel circle

第八单元 曲面体的轴测图 Axonometric drawing of curved solids 曲面体的轴测图 test for curved solids

1、 根据形体的主视图和俯视图，选出正确的斜二测图。

答案:

2、 水平圆的正等测图是什么形状？what is the isometric drawing of horizontal circle?

答案: 椭圆ellipse

3、 根据形体三视图，选择正确的斜二测图。Choose the correct cabniet drawing based on the given views.

答案:

第九单元 线面的正投影 Projection of line and plane 线面投影测试 test for projection of line and plane

1、 根据直线的两面投影，判定CD直线为水平线。The line of CD is H-parallel projection line based on the given projections.

答案: 错误

2、 根据直线的两面投影，判定EF直线为侧平线。The line of EF is W-parallel projection line based on the given projections.

答案: 正确

3、 根据直线的投影和直观图，判定AB直线为水平线。The line of AB is H-parallel projection line based on the given drawings.

答案: 正确

4、 根据直线的投影和直观图，判定AB直线为侧垂线。The line of AB is W-perpendicular projection line based on the given drawings.

答案: 正确

5、 根据平面的两面投影，判定P平面为正平面。The plane of P is V-parallel projection plane based on the given projections.

答案: 正确

6、 根据平面的两面投影，判定Q平面为正平面。The plane of Q is V-parallel projection plane based on the given projections.

答案: 错误

7、 根据平面的三面投影和直观图，判定Q平面为水平面。The plane of Q is H-parallel projection plane based on the given drawings.

答案: 正确

8、 根据平面的投影和直观图，判定Q平面为铅垂面。The plane of Q is V-perpendicular projection plane based on the given drawings.

答案: 正确

9、 根据平面的投影和直观图，判定Q平面为正平面。The plane of Q is V-parallel projection plane based on the given drawings.

答案: 正确

10、 根据直线的两面投影，判定GH直线为一般位置线。The line of GH is general projection line based on the given projections.

答案: 正确

第十单元 立体表面的点 Projection of point 立体表面的点 Projections of point

1、 B点的投影图反映了直观图上B点位置。The projections of point B are right.

答案: 错误

2、 A点的投影图反映了直观图上A点位置。The projections of point A are right.

答案: 正确

3、 A点的投影图反映了直观图上A点位置。The projections of point A are right.

答案: 错误

4、 B点的投影图反映了直观图上B点位置。The projections of point B are right.

答案: 错误

5、 B点的投影图反映了直观图上B点位置。The projections of point B are right.

答案: 错误

6、 B点的投影图反映了直观图上B点位置。The projections of point B are right.

答案: 错误

7、 A点的投影图反映了直观图上A点位置。The projections of point A are right.

答案: 正确

8、 C点的投影图反映了直观图上C点位置。The projections of point C are right.

答案: 错误

9、 C点的投影图反映了直观图上C点位置。The projections of point C are right.

答案: 正确

10、 C点的投影图反映了直观图上C点位置。The projections of point C are right.

答案: 错误

第十一 单元 立体表面交线Intersections of solids 平面体与曲面体相贯Test for intersection

1、 图中左视图相贯线是正确的。The intersections in the left side view are right.

答案: 错误

2、 图中左视图相贯线是正确的。The intersections in the left side view are right.

答案: 错误

3、 图中左视图相贯线是正确的。The intersections in the left side view are right.

答案: 正确

4、 图中俯视图相贯线是正确的。The intersections in the top side view are right.

答案: 错误

5、 图中俯视图相贯线是正确的。The intersections in the top side view are right.

答案: 正确

6、 图中主视图相贯线是正确的。The intersections in the front side view are right. 

答案: 错误

7、 图中主视图相贯线是正确的。The intersections in the front side view are right. 

答案: 错误

8、 图中主视图相贯线是正确的。The intersections in the front side view are right.

答案: 正确

第十一 单元 立体表面交线Intersections of solids 读图测试 Test for understanding intersection

1、 根据图示已知视图，选择正确的左视图。(        )According to the given drawing, pick the correct left view.(        )

答案: A

2、 根据图示已知视图，选择补全交线的主视图。(        )According to the given drawing, provide the correct front view.(        )

答案: D

3、 根据图示所示已知视图，选择正确的左视图。(        )According to the given drawing, provide the correct left view. (        )

答案: B

4、 根据图示已知视图，选择正确的俯视图。(        )According to the given drawing, provide the correct top view.(        )

答案:

5、 根据图示已知视图，选择正确的俯视图。(        )According to the given drawing. provide the correct top view. (        )

答案:

6、 根据图示已知视图，选择正确的俯视图。(        )According to the given drawing, provide the correct top view. (        )

答案: C

7、 根据图示已知视图，选择正确的俯视图。(        )According to the given drawing, provide the correct top view. (        )

答案: B

8、 根据图示已知视图，选择正确的左视图。(        )According to the given drawing, provide the correct left view. (        )

答案: D

9、 根据图示已知视图，选择正确的左视图。(        )According to the given drawing, provide the correct left view. (        )

答案: C

10、 根据图示已知视图，选择正确的俯视图。(        )According to the given drawing, provide the correct top view..(        )

答案: A

第十二 单元 叠加类组合体Composite solids—-superposition solids 叠加类组合体 Test for complicated superposition soli

1、 已知视图与轴测图是对应的。The two views are the projections of  the pictorial figure .

答案: 正确

2、 已知视图与轴测图是对应的。The two views are the projections of  the pictorial figure .

答案: 正确

3、 已知视图与轴测图是对应的。The two views are the projections of  the pictorial figure .

答案: 正确

4、 已知视图与轴测图是对应的。The two views are the projections of  the pictorial figure .

答案: 正确

5、 根据已知条件，补绘的左视图是正确的。The left side view is right based on the given drawings.

答案: 正确

6、 根据已知条件，补绘的左视图是正确的。The left side view is right based on the given drawings.

答案: 错误

7、 根据已知条件，补绘的俯视图是正确的。The top side view is right based on the given drawings.

答案: 正确

8、 根据已知条件，补绘的俯视图是正确的。The top side view is right based on the given drawings.

答案: 错误

9、 根据已知条件，补绘的俯视图是正确的。The top side view is right based on the given drawings.

答案: 错误

10、 根据已知条件，补绘的俯视图是正确的。The top side view is right based on the given drawings.

答案: 错误

第十三单元 切割类组合体 Composite solids—-cutting solids 切割类组合体Test for complicated cutting solids

1、 根据已知条件，补绘的左视图是正确的。According to the given drawings , the left side view is right.

答案: 错误

2、 根据已知条件，补绘的左视图是正确的。According to the given drawings , the left side view is right.

答案: 错误

3、 根据已知条件，补绘的左视图是正确的。According to the given drawings , the left side view is right.

答案: 错误

4、 根据已知条件，补绘的左视图是正确的。According to the given drawings , the left side view is right.

答案: 正确

5、 根据已知条件，补绘的左视图是正确的。According to the given drawings , the left side view is right.

答案: 正确

6、 根据已知条件，补绘的左视图是正确的。According to the given drawings , the left side view is right.

答案: 错误

7、 根据已知条件，补绘的俯视图是正确的。According to the given drawings , the top side view is right.

答案: 正确

8、 根据已知条件，补绘的俯视图是正确的。According to the given drawings , the top side view is right.

答案: 错误

9、 根据已知条件，补绘的俯视图是正确的。According to the given drawings , the top side view is right.

答案: 正确

10、 根据已知条件，补绘的俯视图是正确的。According to the given drawings , the top side view is right.

答案: 错误

第十四单元 综合类组合体Composite solids 综合类组合体Test for composite solids

1、 根据已知视图，补绘的俯视图是正确的。The top side view is right based on the given drawings.

答案: 错误

2、 根据已知条件，补绘的俯视图是正确的。The top side view is right based on the given drawings.

答案: 正确

3、 根据已知条件，补绘的左视图是正确的。The left side view is right based on the given drawings.

答案: 错误

4、 根据已知条件，补绘的左视图是正确的。The left side view is right based on the given drawings.

答案: 错误

5、 根据已知条件，补绘的左视图是正确的。The left side view is right based on the given drawings.

答案: 正确

6、 根据已知条件，补绘的左视图是正确的。The left side view is right based on the given drawings.

答案: 错误

7、 根据已知条件，补绘的左视图是正确的。The left side view is right based on the given drawings.

答案: 错误

8、 根据已知条件，补绘的左视图是正确的。The left side view is right based on the given drawings.

答案: 正确

9、 根据已知条件，补绘的俯视图是正确的。The top side view is right based on the given drawings.

答案: 正确

10、 根据已知条件，补绘的俯视图是正确的。The top side view is right based on the given drawings.

答案: 错误

第十四单元 综合类组合体Composite solids 组合体读图测试题Test for reading composite solids

1、 根据图示已知条件，选择正确的左视图。(        )According to the given figure, provide the correct left  view.(        )

答案: D

2、 根据图示已知条件，选择正确的左视图。(        )According to the known figure, provide the correct left view.(        )

答案: D

3、 根据图示所示已知条件，选择正确的左视图。(        )According to the views and pictorial drawing, provide the correct left view. (        )

答案: C

4、 根据图示已知条件，选择正确的左视图。(        )According to the figure, provide the correct left view. (        )

答案: D

5、 根据图示已知条件，选择正确的左视图。(        )According to the figure, provide the correct left view.(        )

答案: A

6、 根据图示已知条件，选择正确的左视图。(        )According to the given drawings, provide the correct left view. (        )

答案: D

7、 根据图示已知条件，选择正确的左测图。(        )According to the given drawings, provide the correct left view. (        )

答案: C

8、 根据图示已知条件，选择正确的左视图。(        )According to the given drawings, provide the correct left view. (        )

答案: B

9、 根据图示已知条件，选择正确左视图。(        )According to the given drawings, provide the correct left view. (        )

答案: A

10、 根据图示已知条件，选择正确的左视图。(        )According to the known drawings, provide the correct left view.(        )

答案: A

第十五单元 剖视图Section views 剖视图Test for section views

1、 根据轴测图与已知投影，补绘的A-A剖视图是正确的。According to the given drawings , the sectional view of A-A is right.

答案: 正确

2、 根据轴测图与已知投影，补绘的A-A剖视图是正确的。According to the given views and the isometric drawing , the sectional view of A-A is right.

答案: 错误

3、 根据轴测图与已知投影，补绘的A-A剖视图是正确的。According to the given views and the isometric drawing , the sectional view of A-A is right.

答案: 错误

4、 根据轴测图与已知投影，补绘的A-A剖视图是正确的。According to the given views and the isometric drawing , the sectional view of A-A is right.

答案: 正确

5、 根据轴测图与已知投影，补绘的A-A剖视图是正确的。According to the given views and the isometric drawing , the sectional view of A-A is right.

答案: 正确

6、 根据轴测图与已知投影，补绘的A-A剖视图是正确的。According to the given views and the isometric drawing , the sectional view of A-A is right.

答案: 错误

7、 根据轴测图与已知投影，补绘的A-A剖视图是正确的。According to the given views and the isometric drawing , the sectional view of A-A is right.

答案: 正确

8、 根据轴测图与已知投影，补绘的A-A剖视图是正确的。According to the given drawings, the sectional view of A-A is right.

答案: 错误

第十六单元 工程中常用的剖视图 Section views widely used in engineering 工程中常用的剖视图Test for section views

1、 根据轴测图与已知投影，补绘的A-A剖视图是正确的。The sectional view of A-A is right based on the given drawings.

答案: 正确

2、 根据轴测图与已知投影，补绘的A-A剖视图是正确的。The sectional view of A-A is right based on the given drawings.

答案: 错误

3、 根据轴测图与已知投影，补绘的A-A剖视图是正确的。The sectional view of A-A is right based on the given drawings.

答案: 错误

4、 根据轴测图与已知投影，补绘的A-A剖视图是正确的。The sectional view of A-A is right based on the given drawings.

答案: 正确

5、 根据轴测图与已知投影，补绘的A-A剖视图是正确的。The sectional view of A-A is right based on the given drawings.

答案: 正确

6、 根据轴测图与已知投影，补绘的A-A剖视图是正确的。The sectional view of A-A is right based on the given drawings.

答案: 错误

7、 根据轴测图与已知投影，补绘的A-A剖视图是正确的。The sectional view of A-A is right based on the given drawings.

答案: 正确

8、 根据轴测图与已知投影，补绘的A-A剖视图是正确的。The sectional view of A-A is right based on the given drawings.

答案: 错误

9、 根据轴测图与已知投影，补绘的A-A剖视图是正确的。The sectional view of A-A is right based on the given drawings.

答案: 正确

10、 根据轴测图和已知投影，补绘的B-B阶梯全剖视图是正确的。The sectional view ofB-B is right based on the given drawings.

答案: 正确

11、 根据给定的剖视图，补绘的俯视图具有正确的剖切位置。The location of the top sectional view is right based on the given drawing.

答案: 错误

12、 根据给定的剖视图，补绘的俯视图具有正确的剖切位置。The location of the top sectional view is right based on the given drawing.

答案: 正确

第十七单元 断面图 Section 断面图Test for section

1、 根据轴测图和已知视图，补绘的1-1断面图是正确的。The section of 1-1 is right based on the given drawing.

答案: 正确

2、 根据轴测图和已知视图，补绘的1-1断面图是正确的。The section of 1-1 is right based on the given drawing.

答案: 正确

3、 根据轴测图和已知视图，补绘的A-A断面图是正确的(剖面材料是钢筋混凝土）。The section of A-A is right based on the given drawing(reinforced concrete)

答案: 正确

4、 根据轴测图和已知视图，补绘的A-A断面图是正确的(剖面材料是钢筋混凝土）。The section of A-A is right based on the given drawing(reinforced concrete)

答案: 正确

5、 根据轴测图和已知视图，补绘的A-A断面图是正确的(剖面材料是钢筋混凝土）。The section of A-A is right based on the given drawing(reinforced concrete)

答案: 正确

6、 根据轴测图和已知视图，补绘的A-A断面图是正确的。The section of A-A is right based on the given drawing(reinforced concrete)

答案: 正确

第十七单元 断面图 Section 断面图读图测试 Test for reading cross section

1、 根据图示已知条件，选择正确的9-9剖视图。(        )According to the given drawings, pick up the correct section view of 9-9.(        )

答案: A

2、 根据图示已知条件，选择正确的9-9剖视图。(        )According to the given figure, pick up the correct section view of 9-9. (        )

答案: A

3、 根据图示已知条件，选择正确的9-9断面图。(        )According to the known views, pick up the correct section view of 9-9. (        )

答案: D

4、 根据图示已知条件，选择正确的9-9断面图。(        )According to the given views, pick up the correct cross section of 9-9. (        )

答案: A

5、 根据图示已知条件，选择正确的9-9断面图。(        )According to fig., pick up the correct cross section of 9-9. (        )

答案: B

6、 根据图示已知条件，选择正确的9-9断面图。(        )According to the given views. pick up the correct cross section of 9-9. (        )

答案: C

7、 根据图示已知条件，选择正确的9-9断面图。(        )According to the known views, pick up the correct cross section of 9-9. (        )

答案: B

8、 根据图示已知条件，选择正确的9-9剖视图。(        )According to fig, pick up the correct section view of 9-9. (        )

答案: C

9、 根据图示已知条件，选择正确的9-9断面图。(        )According to the figure., pick up the correct cross section of 9-9. (        )

答案: B

10、 根据图示已知条件，选择正确的9-9断面图。(        )According to the given views, pick up the correct cross section of 9-9. (        )

答案: C

上方为免费预览版答案，如需购买完整答案，请点击下方红字

点击这里,购买完整版答案

嫂轰茅冯哪酪眠哩解东融悉教